Swimming Pool
covers

High-quality pool covers are made to measure and are available in different types

Pool covers from Inducon are available for outdoor and indoor pools. The three main types are foil covers, slat folding covers and slatted rolling covers. Inducon pool covers will keep the heat in the pool and therefor save energy. Besides energy saving, a pool cover will protect your pool which will extend its lifespan. With Inducon’s years of experience and our large selection, there is an Inducon pool cover for every pool.

We have solutions for:

Private Swimming PoolsPUBLIC SWIMMING POOLS
zwembadafdekkingen

Why Inducon pool covers?

  • Energy savings of up to 50%
  • Short payback periods
  • A cover for (almost) every situation
  • New construction and retrofit possible
  • Almost 50 years of experience in cover systems
  • Long service life (> 30 years)
  • Good advice

Discover the benefits of an Inducon pool cover and experience the perfect combination of reliability, safety and convenience.

energiebesparende zwembadafdekking

Energy-saving
Inducon swimming pool cover systems

Keeping your pool at temperature requires a lot of energy. Reducing your pool’s energy consumption as much as possible is good for your wallet and the environment. With three different types of covers, there is almost always a suitable system for your pool.

Contact us

Foil cover

With this type, the pool is covered with a cover made of one or more parts. Foil covers are economically attractive but require a bit more time and attention in use to apply them over the water and then roll them up again.

Foil covers are mounted on the platform in 99% of cases. This can be mobile, fixed on the bath rim, but also on columns above the bath. Together with the customer, we look for the best solution on site. Placing this type of cover in the platform is also possible. In that case, a lifting system is required to move the foil up first, after which it can be pulled over the water.

Roller covers

This cover consists of plastic linked panels sealed airtight with end caps. This type is often mounted under water but can also be mounted on the pool rim, possibly with a casing. One of the main features of this type of cover is that it must be able to fall onto the water or move up out of the pool to function. The cover cannot be dragged across the platform.

Roller cover above or under water

Roller covers can be mounted above or under the water. Like the foil covers, this can be done on the pool rim or on columns next to the pool, depending on the situation on site. Due to the weight of the overall installation, we do not recommend mobile installation for this type of cover.

Underwater, the cover can be built into a shaft in the bottom or one of the walls of the pool. The shafts can be sealed with a fixed bulkhead or movable flap. Installation only takes place in newly built pools because the design of the pool needs to be adapted accordingly. Subsequent major structural modifications to the pool do not occur in practice.

Folding cover

The folding cover system was developed for large pools. Large water surfaces require a lot of cover material (foil or rolling slatl). This amount of cover material requires space on the platform or, for example, a shaft at the bottom of the pool. As an alternative to this, Inducon has developed the folding cover system. Here, the cover is stored partially or completely, in a dry shaft, behind the pool. This is the only system for large pool that works automatically. Apart from supervision and guidance, this system requires no attention. 50-metre pools can be covered with this system in just over 10 minutes. Because it takes hardly any effort or time to operate the cover, this type of cover is used much more often than, for example, a (large) foil cover, which requires more time and therefore saves more energy.

Underground pool covers

As mentioned above, the system can be placed partly underground. In this case, a raised side is created under which the cover emerges. In addition, the system can be fitted with a lifting system with which the entire system is completely out of sight when the pool is in use. Folding covers can be fitted to both new and existing pools. In such cases, before our engineers start work, we first inspect the situation on site to check whether there are any pipes in the platform, for example, or whether they can be moved.

Customization
makes
maakt anything
possible

Inducon covering systems are always custom-made. In the preliminary phase of new construction, we are happy to help you to optimize the placement of the systems on site. If possible, an installation can also be installed invisibly. When installing at existing pools, invisible installation is more difficult but sometimes possible.

User-friendly

As already mentioned, the “success” of your cover is largely determined by its usability. This depends on the chosen design in combination with the team and conditions on site. Together with you, we look for the most optimal design and set-up.

Low-maintenance pool covers

Pool covers from Inducon are, if properly chosen, low-maintenance. On request, we carry out annual maintenance, but this can also be done by the owner. As with all technical installations, periodic replacement of moving parts should be taken into account. Wear and tear depend on how the installation is handled. If we install on site, user instructions are provided upon delivery.

Neem contact op

Swimming pool cover processed underground

Folding cover open and closed

Internationally active

Our solutions are unique and often groundbreaking. Clients from Norway to New Zealand trust our down-to-earth professionalism from Drenthe. They experience our flexibility in service and our passion for our work. Hence: Inducon, fluid technology, fluid passion!

Why an Inducon Movable Swimming Pool Floor?
Imagine a pool that adapts to YOUR needs, where the depth is flexible and the possibilities endless. That is exactly what we offer you with our state-of-the-art pool floors! Do you want a fixed depth, or perhaps a sloping depth for that extra diving pleasure? With our pool floors, it can be done! These floors adjust effortlessly to any desired water depth. But that’s not all.

Our floors not only serve as pool floors; they also form an insulating cover when raised. This means you not only control the depth, but also the energy efficiency of your pool. This is due to the advanced design that guarantees high load capacity and stability.

And let’s talk about style!
We understand that your pool should reflect your taste. Therefore, a wide range of finishing options are available, think plastic, tiles or natural stone. The choice is yours!

Rest assured, these advanced floors are exceptionally easy to operate. With just a few simple actions, you can adjust the depth or cover your pool, all with minimal structural modifications.

We go beyond offering just options. We understand that every swimming pool is unique. Therefore, there are numerous options to ensure that our solution fits perfectly. In doing so, our floors are also available for existing pools.

‘Inducon, fluid technology, fluid passion’

kaart Inducon

Fluid
technology

fluid
passion

1978

A household name in the world of movable floors and covers for more than 40 years.

1.500+

More than 1,500 unique installations, many of which are still in operation.

Robust

Our products are built to be enjoyed for a long time. Sometimes for a lifetime!

Craftsmanship

Our craftsmanship is based on years of experience combined with new techniques and insights.

Custom made

No two pools are the same. That is why we work with the client to find the most suitable solution.

Some of our work
project overview

Over the past 40 years, nearly 1,300 projects have been carried out by Inducon in which an installation has been produced and delivered to owners of private swimming pools, wellness and rehabilitation centres or to public swimming pools. Our portfolio shows photos of some of these projects. Let these be your inspiration!

Frequently asked questions about
pool covers

What are the benefits of pool covers?

Inducon pool covers offer multiple benefits, such as energy savings of up to 50%, a long lifespan of more than 30 years, and a short payback period. In addition, a cover provides protection for the pool and extends the lifespan of the pool itself.

What types of pool covers does Inducon offer?

Inducon offers three main types of pool covers:

  • Foil covers: Economically attractive and suitable for simple installations
  • Slat Rolling Covers: made out of connecting plastic profiles. Often installed under water.
  • Slat Folding Covers: Suitable for larger pools and mainly full automatic

For which pools are the covers suitable?

Inducon Pool Covers are suitable for outside and inside pools. A solution can be found for nearly every situation, whether it handles newly designed pools or renovation projects

How user-friendly are Inducon's pool covers?

Inducon places strong emphasis on user-friendliness. Depending on the site situation, a system is chosen that is easy to operate. This promotes regular use of the cover, ensuring maximum energy savings.

How much maintenance do pool covers require?

Inducon cover systems are low-maintenance, if properly chosen and installed. Annual maintenance can be carried out by Inducon upon request, but can also be managed by the owner himself. However, periodic replacement of moving parts is necessary, depending on use.

Can a cover also be installed invisibly?

Yes, if possible, covers can be installed invisibly, especially in new construction projects. In existing pools, this can sometimes be done, but it depends on the specific situation on site.

How much time does it take to cover up a swimming pool?

This depends on the type of cover. Foil covers require a little more time and attention to set up, while a slatted folding cover, for example, can fully automatically cover a 50-metre pool in just over 10 minutes.

What makes pool covers energy-saving?

Pool covers from Inducon significantly help retain heat in the pool, resulting in lower energy requirements to keep the pool at temperature. This is not only good for your wallet, but also for the environment.

Is customisation possible for pool covers?

Yes, all cover systems from Inducon are custom-made to perfectly match the specific requirements of the pool and location.

Can Inducon advise on the right cover for my pool?

Yes, with almost 50 years of experience in covering systems, Inducon offers expert advice. Sometimes this can even lead to negative advice if a particular solution turns out not to be suitable for your situation. Inducon strives to work with you to find the best-fit solution.

zwembadafdekkingen van Inducon

DO YOU HAVE A QUESTION?

Or call

Talk directly to a swimming pool specialist